Bridge Butterfly Automatic Turnstiles Tripod Security with RFID
Product Name:Tripod Turnstile/Waist Height Turnstile
1.stainless steel RFID card tripod turnstile.
2.stable,mute,no mechanical impact.
1) Counter and counter display
2) Access controller or card reader
3) Key by-pass
Stainless steel RFID card tripod turnstile with software management
1. Power Supply: AC220V±10V ,50Hz / AC110V±10V ,60Hz
2. Temperature: -15 to 60 degrees
3. Humidity: <95%, without concretion
4. Passage Width: <=600mm
5. Passing Speed: 40 persons/min (IC Card)
6. Power Consumption: 100W/24V
7. Input Interface: +12V electrical signal or impulse signal with
width more than 100ms, drive current >10mA
8. Communication Interface: RS485 (Distance: <=1200m)
9. Material: Housing - 304 stainless steel
arm - 202 stainless steel
10. Dimension: 1200*280*980 mm
Arm Length: 50mm
11. Weight: 54kgs
12. Working Environment: Indoors or outdoors with shed
Functions and features:
1. Unique incomplete wheel transmission is adopted to make
turnstiles held or unheld in zero position more accurate and
2. Running stable, little noise and no mechanical impact
3. Self-checking-power-on function, if power on, turnstile will
auto get to be held.
4. Various working means can be set in the control panel menu,
namely: bi-direction card reading passing, or one direction card
reading passing and another passing limits, or one direction card
reading passing and another free passing, etc.
5. If power off, arm will fall automatically while power on later, arm
should be lift by hand. First press the arm with a little force and then lift it
6. It is with RS485 connection for far control arm up and down to
satisfy the special needs or fire control requirements.
7.It is with standard electrical interface to connect various kinds
of readers and writers for easy integration and also computer far
control and management can be realized by computer.
8. It will count the persons who have been passed through
automatically and will show the number by LED
directly.(LED is optional)
9. Passing direction will be shown by LED and passengers will know
which direction is allowed to pass.
10. Card reading memory or card reading without memory function can
be set in the control panel menu according to your request.
11. If working with software, the total-in-population can be set to
satisfy special request.
12. Re-position function. After card reading, if passenger not
through within the specific time, system will auto cancel passing
right for this time and the limit passing time length can be set.
13. Card Mouting is avaliable.
14. Uncompleted wheel turning system is adopted for locking the turnstile in zero, and unlocking will be more
realiable and accurate.